Show Menu
Menu

Radio-focussed variant of Voyager 8 with 50% extra power

voyager8

As traditional reachback network architectures are supplemented by the need to analyse data on the edge of the network, your compute and communications requirements have grown.

The Voyager 8+ chassis increases the power budget of Voyager 8 by 50% to support Klas’ Xeon-based compute modules and the expanding range of radio interface brackets.

This provides access to the data that you need in-theater and the ability to analyse and disseminate it.

The range is supplemented by the airworthiness-qualified variant, Voyager 8+  to provide enroute communications.

Figure 1: Front of Voyager 8+ Showing 8 Voyager Module Slots Figure 2: Voyager 8+ Rear

 

Figure 3: Chassis removed from case for rack mounting

Key Features:

Supports the full range of Voyager network modules to provide:

  • Routing & switching
  • VoIP
  • Server virtualization
  • Radio Integration
  • WAN acceleration
  • Storage
  • UPS
  • Satellite, terrestrial and cellular backhaul

Can be configured as a tactical data storage network, tactical radio integration system, cross domain suite and more

Compute module on the rear of the Voyager 8 Plus runs KlasOS Keel and hence provides many familiar features such as a Cisco like CLI for management, SSH, SNMP, and a built-in hypervisor. Features include:

  • LCD display which shows battery status information
  • Monitoring of battery state and input power state via SMBus and PMBus
  • Reporting of battery and power state via SNMP
  • User authentication, SSH access, etc. using the same KlasOS codebase as for Common Criteria approved products
  • Built-in hypervisor to allow deployment of a GuestOS, for example, a lightweight management suite to monitor the installed modules
Download Brochure
View our full Voyager range
Request a Call

Specifications

Transit Case

Size

  • 18.8” x 22.5” x 10.1” (478 x 571 x 257mm)

Weight

  • 21.35kg (47lbs) (excluding batteries)

Construction

  • Aerospace-grade, carbon fiber monocoque built from single mold structure for maximum strength
  • Milled aluminum handles
  • O-ring seal around front and rear lids
  • Pressure equalization valve

Handles and Wheels

  • Retractable extension handle
  • Handles on top and bottom of case
  • Dual heavy duty plastic wheels

Standards

Designed to meet:

  • IP67 case
  • MIL-STD-810H
  • BMIL-STD-461G

Chassis

  • 5U 19-inch rack (additional chassis shelf required – sold separately)

Construction

  • Aluminum sheet metal
  • Milled aluminum latches
  • Eight (8) Voyager network module slots (for use with or without Voyager 1 battery attached to modules)

Operating Temperature Range

  • -10°C to 50°C

Storage Temperature Range

  • -10°C to 85°C

Input Electrical Specifications

■ 21-34 VDC (38 Amp maximum)
■ 90-264 VAC (<10 Amp at 100 VAC)
■ Max input current of 10 Amp allowed for NEMA Sockets and Voyager 8 Plus

Output Electrical Specifications

■ 8 x 12 VDC at 120 W and 28 VDC at 120 W. The total slot power is 560W
■ 8 x 52 VDC outputs in backplane for PoE support (PoE power available is 200W)
■ 2 x AC outputs available when AC input is present (these outlets are not filtered but are fused to 10 Amp. Please check the powered device for voltage range before using)

Compute Module

■ Intel® Atom™ x5-E3930 dual core processor with 1.3 GHz core frequency up to 1.8 GHz
■ 2 MB L2 cache
■ 2 GB 2133 MT/s LPDDR4 onboard memory and 16 GB eMMC onboard flash
■ 1 Gb Ethernet and console port interface

UPS

■ 3 x BB-2590 batteries (available in high capacity for extended operation or lower capacity to comply with IATA regulations)